Automobile crane outrigger pad requirements

Automobile crane outrigger pad requirements

1. Find a flat ground, place a wooden block at the bottom of the outrigger to keep the outrigger stable before hoisting. Vehicle hanging foot pads require that the car hanging legs and skids will not damage the road roof, and will not be unstable and overturned. Pay attention to the following points in daily life:

2. Hoisting can only be carried out after all outriggers are fully supported on a straight and firm ground. If the ground does not meet the requirements of the relevant regulations, sufficient land preparation work should be carried out in advance, and it can only be used after confirming that it is safe and qualified. In case of special (soft or sloping) ground, the support plate must be leveled with crane outriggers or steel plates that are compatible with the ground, and ensure that it is firm and cannot be dropped during lifting operations.

3. The vehicle cantilever foot pad is a backing plate under the outriggers of construction machinery vehicles, which can effectively disperse the weight of the construction machinery vehicle itself and the lifting weight to the area of the polyethylene outrigger backing plate to ensure that the construction machinery works on the ground environmental safety. When the ground working environment of construction machinery is not sure whether it is good or not, the use of polyethylene outrigger pads can increase the friction between the pad and the contact point of the car, greatly improve the safety factor, and effectively avoid the occurrence of severe accidents.

Expansion: The role of the supporting foot pad: the outrigger pad is mainly used for the pad under the outrigger to play a supporting role. The outrigger backing plate has high strength and rigidity, thereby reducing the amount of deformation of the backing plate body under stress, and providing more stable supporting force for construction machinery. Save a lot of use costs and improve the quality of work.