Telephone/Whatsapp: +86-18678355281
You are here: Home » News » News » Polyethylene PE300 sheet Uhmwpe Sheet/Panel/Plate/Board With Low Price

Polyethylene PE300 sheet Uhmwpe Sheet/Panel/Plate/Board With Low Price

Views: 8563     Author: Site Editor     Publish Time: 2019-07-30      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Polyethylene PE300 sheet Uhmwpe Sheet/Panel/Plate/Board With Low Price

Polyethylene PE300 sheet Uhmwpe SheetPanelPlateBoard With Low Price


1. Advantage:


UHMWPE sheets (Ultra  high  Molecular Weight Polyethylene) is a thermoplastic engineering plastic with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication and high-impact resistance, which is regarded as a surprised engineering plastic of excellent comprehensive capacity and competitive price.


1.Abrasive resistance which always have in thermoelectricity polymer.

2.Best shock resistance even in low temperature.

3.Low frictional factor, and well sliding bearing material.

4.Lubricity( no caking, in adhesion) .

5.Best chemical corrosion resistance and stress craze resistance.

6.Excellent machinery process ability .

7.Lowest water absorption(<0.01%) .

8.Paragon electric insulativity and antistatic behavior .

9. Nice high energy radioactive resistance.

10.Density is lower than other thermoplastics (< 1g/m3).

11.Long using temperature range: -269°C--90°C.



2.Main characteristics:


1. Very high-wear resistance, seven times wear resistance than steel, four times than PTFE

2. Very high anti-impact resistance, two times impact resistance than PC, five times than ABS.

3. Good self-lubrication, the same as PTFE, better than steel and brass appended lubricating oil.

4. Good anti-corrosion resistance, it has very stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity.

5. Very high-inadhesion resistance, the surface of product hardly affixes other material.

6. Very high-impact resistance, ten times impact resistance than PA66, eight times than PTFE.

7. Good low temperature resistance, in liquefied nitrogen (- 196), it still has the prolongation. few other materials can reach to this performance.

8. Non-toxic and clean property, UHMW-PE, which is the material that Food and Drug Administration and United States Department of Agriculture (ASDA) permit to apply in food and medicine fields.



The main performance comparison


High abrasion resistance

Materials

UHMWPE

PTFE

Nylon 6

Steel A

Polyvinyl

fluoride

Purple steel

Wear Rate

0.32

1.72

3.30

7.36

9.63

13.12

Good self-lubricating properties,low friction

Materials

UHMWPE -coal

Cast stone-coal

Embroidered

plate-coal

Not embroidered plate-coal

Concrete coal

Wear Rate

0.15-0.25

0.30-0.45

0.45-0.58

0.30-0.40

0.60-0.70

High impact strength, good toughness

Materials

UHMWPE

Cast stone

PAE6

POM

F4

A3

45#

Impact

strength

100-160

1.6-15

6-11

8.13

16

300-400

700



3.Sheet Size Available:


1500*3000mm

1200*4000mm

2200*10000mm

Thickness: 6-200 mm



4.Technical parameter:


Subject

Unit

Paraters

Tensile strength

Mpa

>30

Compression strength

Mpa

≥41.8

Bending strength

Mpa

≥32

Impact strength

KJ/m²

≥140

Ball identation strength

N/mm²

≥40.8

Surface resistivity

Ω

4.9×10¹³

Water absorption

%

0.0001

Heat distortion temperature

°C

85 °C

Frication coefficent

%

<0.09


Hot Products

It have excellent wear resistance, low temperature impact resistance, selflubricating, nontoxic, water resistance, chemical resistance, and heat resistant, they are superior to general PE. It can be widely used to impact resistance, wearresistant, corrosionresistant, nonsticking, reduce noise, and high hygiene requirements of industrial mining field. It can greatly reduce operatingcosts of the equipment and maintenance, at the same time improve overall economic benefits.
0
0
HDPE Sheet is a semi-crystalline, thermoplastic engineering material with high toughness and good low-temperature properties. Customization is available for different specifications and performances to serve different applications.
0
0
We can make different UHMWPE Sheet according to different application .Like anti-UV resistant anti-static and with other characters , Best quality with good surface and color make our UHMWPE sheet more and more popular all over the world.
0
0
Uhmwpe marine dock bumper pad could avoid the impact damage between ships and dock . Because of the pe plastic marine fender face pad fender high impact resistance performance, HDPE / UHMWPE marine dock bumper pads instead of the traditional steel ones is widely used in ports and docks at home and abroad.
0
0
Langrui engineered plastic cribbing plates and outrigger pads are lightweight, strong, and solid designed tu support your crane, and can be easily handled and positioned byp one persn or two. It can not be warped like wood or corroded like steel. It won't break in the long guaranteed time and obviously could not attract thieves.
0
0
Shandong Langrui Machinery Technology Co., Ltd. is a professional manufacturer integrating R&D, production, sales and service.

MENU

PRODUCTS

FOLLOW US

Copryright  2006-2023 Shandong Langrui Machinery Technology Co., Ltd. All Rights Resreved.